Correct PB booster check valve...1966

[Michael G.]

Any of the two original PB booster check valves correct for 1966? Black clamps on booster hose? Thanks in advance.

[John M.]

Re: Correct PB booster check valve...1966

I vote for the one on the left.........John

[Don Z.]

Re: Correct PB booster check valve...1966

Michael, Check out Restorer Summer 2003, page 12 for booster check valve photo.

[William C.]

Re: Correct PB booster check valve...1966

Yes on Black clamps on the booster hose, note that originals had the "ears" on the clamps straight-cut, where replacements used in current cars use rounded ears.

[Michael G.]

Re: Correct PB booster check valve...1966

Yes on Black clamps on the booster hose, note that originals had the "ears" on the clamps straight-cut, where replacements used in current cars use rounded ears.

If I remember correctly William, clamps were of the black phosphate finish.

[William C.]

Re: Correct PB booster check valve...1966

You and I remember the same...

[Mike M.]

Re: Correct PB booster check valve...1966

Michael,
Could be the angle of the pix, but, neither seem to have to typical circular protrudance present on production units.
HanD

[Jack H.]

Re: Correct PB booster check valve...1966

I'm used to seeing this form of geometry. Note the relative height of the inner vs. outer rings...

[Michael G.]

Re: Correct PB booster check valve...1966

Hard to tell much from the side Jack. How about a frontal shot. Thanks.

[Michael G.]

Re: Correct PB booster check valve...1966

All........still needing some help. Need someone to post frontal image(s) of a correct booster check valve for 1966.........and........to the first person to post a this image..............a big ole saaaaaalute!

[John H.]

Re: Correct PB booster check valve...1966

All........still needing some help. Need someone to post frontal image(s) of a correct booster check valve for 1966.........and........to the first person to post a this image..............a big ole saaaaaalute!

Michael -

How's this?

[Michael G.]

Re: Correct PB booster check valve...1966

Michael,

Yo.....delightful. Thanks.

Guess I'm still on the hunt for one of these. Anyone?

[Blake W.]

Re: Correct PB booster check valve...1966

Michael -

How's this?

I'm curious about these valves too. Were they specific for C2 models or year specific? My '65 valve doesn't look like the pic (and I knew that). 65 judging manual says "opaque off-white color with a single concentric circle and dimple in the center". Just like what is pictured. So, is this the one I should be looking for my '65? thanks

[Bill M.]

Re: Correct PB booster check valve...1966

I'm curious about these valves too. Were they specific for C2 models or year specific? My '65 valve doesn't look like the pic (and I knew that). 65 judging manual says "opaque off-white color with a single concentric circle and dimple in the center". Just like what is pictured. So, is this the one I should be looking for my '65? thanks

The one on my Dec. '64 assembled car looks like John's photo.

[Blake W.]

Re: Correct PB booster check valve...1966

The one on my Dec. '64 assembled car looks like John's photo.

Thanks Bill, that helps a lot. One last question on these valves...Is this particular booster valve specific to corvette of that era or would the same one have been used on other GM cars of same years; Maybe passenger cars, Pontiac, Buick, Olds, ect?