finish-brake hose clips and msc.

[Steve L.]

These are the U shaped clips that hold the hoses to the frame. My guess is they are zinc plated.

The bolt and nuts that hold the fuel tank support X member to the frame. My guess is that they are black phosphate. For the lock and flat washer, my guess is natural. The nut looks like it is extra thick(0.325")

The 2 hex screws that hold the vapor/gas separator to the fuel tank are probably black phosphate - these don't look available from any of the vendors.

This is for a 73

Thanks
Steve L.

[Edward J.]

Re: finish-brake hose clips and msc.

These are the U shaped clips that hold the hoses to the frame. My guess is they are zinc plated.

The bolt and nuts that hold the fuel tank support X member to the frame. My guess is that they are black phosphate. For the lock and flat washer, my guess is natural. The nut looks like it is extra thick(0.325")

The 2 hex screws that hold the vapor/gas separator to the fuel tank are probably black phosphate - these don't look available from any of the vendors.

This is for a 73

Thanks
Steve L.

Steve,I would say the clips were blk. phos. for brake hoses, at least my 72 were, I had the originals on mine with the orig. hoses,

the fuel tank cross member bolt is blk. phos and the nut and washers were zinc.

the fuel sepaator bolts were phos. not that anyone will see them.