Solid Axle Trap Door Oil Pans - NCRS Discussion Boards

Solid Axle Trap Door Oil Pans

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill M.
    Extremely Frequent Poster
    • March 31, 1977
    • 1386

    Solid Axle Trap Door Oil Pans

    I ran across a trap door pan on eBay that has a different baffle configuration than my '62 pan. Both pans are 3-step with one long vertical rib centered fore-aft in the deep sump section of the pan. Here's the baffles:

    '60-'61 3769761?



    '62 3789629?



    The question marks are because these pans have not been removed from an unmolested original car. It's guesswork on my part.
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2689

    #2
    Re: Solid Axle Trap Door Oil Pans

    Looks to me that there are more than one vertical rib in the second picture. Are the end openings the same size?
    Terry

    Comment

    • Bill M.
      Extremely Frequent Poster
      • March 31, 1977
      • 1386

      #3
      Re: Solid Axle Trap Door Oil Pans

      Originally posted by Terry Deusterman (11486)
      Looks to me that there are more than one vertical rib in the second picture. Are the end openings the same size?
      Terry
      Nope. It's sitting right next to me. One rib. It's a service part from 1964. The first picture is from eBay, so I don't know for sure about the opening, but the sacond picture is the early, small opening.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"