1963 Corvette radiator support non air car - NCRS Discussion Boards

1963 Corvette radiator support non air car

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doug Y.
    Frequent User
    • January 14, 2009
    • 62

    1963 Corvette radiator support non air car

    I was just wondering if there is any difference between a '63 and a '64 non air radiator support. I am working on a '63 340 HP 327 car. I have chance to purchase a used support but am not sure of any differences. I know a FI support is different and do not want one. Thanks.
  • Doug F.
    Very Frequent User
    • October 31, 1983
    • 322

    #2
    Re: 1963 Corvette radiator support non air car

    63's have an extra sheet metal [ extension ] where the horn mounts

    Comment

    • Sydney G.
      Very Frequent User
      • January 31, 1994
      • 443

      #3
      Re: 1963 Corvette radiator support non air car

      Doug,

      I think there might also be a difference between early and late non FI core supports in '63 but I'm not quite sure what that difference is.
      Hopefully someone will clarify.

      Syd

      Comment

      • Jim L.
        Extremely Frequent Poster
        • September 30, 1979
        • 1806

        #4
        Re: 1963 Corvette radiator support non air car

        Originally posted by Sydney Garber (23984)

        a difference between early and late non FI core supports in '63 but I'm not quite sure what that difference is.
        One difference, and there might be others, is that the early '63 supports do not have the oval hole on the passenger side through which transmission cooler lines pass.

        Relatedly, early '63 fan shrouds do not have a clearance notch in their mounting flanges for these same cooler lines.

        Jim

        Comment

        • John H.
          Beyond Control Poster
          • November 30, 1997
          • 16513

          #5
          Re: 1963 Corvette radiator support non air car

          Originally posted by Doug Faber (6923)
          63's have an extra sheet metal [ extension ] where the horn mounts
          Here's a photo showing those distinctive '63-only formations on the front of the support where the horns mount (this one is for an F.I. car).
          Attached Files

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"