Holley Fast Idle Cams

[David S.]

Hi Guys,

I found this information to be very useful. I figured I would pass it along. It is from Eric Jackson of Vintage Muscelcar Parts.

Best,
Dave

http://www.yenko.net/ubbthreads/showflat.php/Cat/0/Number/425243/an/0/page/0#Post425243

[Joe L.]

Re: Holley Fast Idle Cams

Hi Guys,

I found this information to be very useful. I figured I would pass it along. It is from Eric Jackson of Vintage Muscelcar Parts.

Best,
Dave

http://www.yenko.net/ubbthreads/show...e/0#Post425243

Dave------


There were at least 4 different fast idle cams used on Corvettes with Holley carburetors over the 1965-72 period. None are any longer available from GM, but they may be available from Holley. With the GM part number for any particular application, it might be possible to cross-reference to a Holley part number.

[Clem Z.]

Re: Holley Fast Idle Cams

Dave------


There were at least 4 different fast idle cams used on Corvettes with Holley carburetors over the 1965-72 period. None are any longer available from GM, but they may be available from Holley. With the GM part number for any particular application, it might be possible to cross-reference to a Holley part number.

if you look in the holley parts and spec book for the GM carb and the cam # and that # is molded on the cam