'61 HP 230 decal placement - NCRS Discussion Boards

'61 HP 230 decal placement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter V.
    Expired
    • June 2, 2008
    • 116

    '61 HP 230 decal placement

    I have recently restored the steel valve covers on my '61 230 HP. Does each cover get a decal? Where should the top of the decal be relative to the top curve of the valve cover? Thanks!
  • Dennis C.
    Very Frequent User
    • June 30, 2002
    • 884

    #2
    Re: '61 HP 230 decal placement

    Originally posted by Peter Vangsness (49065)
    I have recently restored the steel valve covers on my '61 230 HP. Does each cover get a decal? Where should the top of the decal be relative to the top curve of the valve cover? Thanks!
    Peter,

    The decal installation is shown in the AIM on sheet 4.00 of section 6. It is shown to be along the center line of the rocker cover 1.25" up from the formed edge that rests on the head.

    Regards,

    Dennis

    Comment

    • Peter V.
      Expired
      • June 2, 2008
      • 116

      #3
      Re: '61 HP 230 decal placement

      Thanks, Dennis. I wasn't sure there was a directive on the proper location.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"