exhaust hanger measurement. - NCRS Discussion Boards

exhaust hanger measurement.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Wayne P.
    Expired
    • January 22, 2008
    • 444
    #1

    exhaust hanger measurement.

    I didn't measure my old frame for the rear exhaust holders. If I remember it is 8 inches from the back of frame to center of holes. Any help would be appreciated don't need extra holes in new frame. 1964
    Tags: None
      • Top
    • Alan D.
      Extremely Frequent Poster
      • December 31, 2004
      • 2025
      #2
      Re: exhaust hanger measurement.

      the holes are off set a little;
      Outside is 8 11/32 while inside is 8 1/16
      Both are 3/4 in from outside rail.
      Attached Files
        • Top

        Comment

        • Wayne P.
          Expired
          • January 22, 2008
          • 444
          #3
          Re: exhaust hanger measurement.

          Alan : Just what I needed. I will make a template. Thanks
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"