1972 LT1 engine pads

[Sal C.]

Looking for good clear photos of 1972 LT1 engine stamps for research project.

[Kevin G.]

Re: 1972 LT1 engine pads

Sal,

I would be glad to help! Let me try to get a couple shots for you. It is a little tough with the A/C lines and brackets in the way but I'll do my best.

Regards,
Kevin

[Roy V.]

Re: 1972 LT1 engine pads

I'll try to find some better ones, but these are the ones I can get to right now






hope these help
Regards
Roy

[Mark D.]

Re: 1972 LT1 engine pads

Sal,

I would be glad to help! Let me try to get a couple shots for you. It is a little tough with the A/C lines and brackets in the way but I'll do my best.

Regards,
Kevin

Kevin,

I may have yours. What's the four digits of the VIN?

Mark

[Kevin G.]

Re: 1972 LT1 engine pads

Kevin,

I may have yours. What's the four digits of the VIN?

Mark

Mark,
0942, I hope you are a better camera man than I am! I can't get a good shot of it! There are just to many things in the way to get a good picture?
I didn't see you snap any pictures, the car has only been out in public once?

Kevin

[Kevin G.]

Re: 1972 LT1 engine pads

Sal,

Here's one before I cleaned of the motor? Hope it helps!

Kevin

[Mark D.]

Re: 1972 LT1 engine pads

Kevin,

Your right, I didn't get it. Maybe next time.

Mark

[Sal C.]

Re: 1972 LT1 engine pads

Thanks guys. Any others would be appreciated. Hey, Mark we're all getting old. No problem.

[Warren F.]

Re: 1972 LT1 engine pads

Sal,

I'm sure Greg would give you both of his '72 LT-1's engine pads.

[Dick W.]

Re: 1972 LT1 engine pads

Sal, I have several and will email them to you tomorrow when I return to the office. All my photos are stored there.

[Steve B.]

Re: 1972 LT1 engine pads

Here are a couple done on the same day:

[Bryan M.]

Re: 1972 LT1 engine pads

Looking for good clear photos of 1972 LT1 engine stamps for research project.

Here's one I used to own.

[Marc B.]

Re: 1972 LT1 engine pads

My little contribution to this interesting tread. Same one, different focus...I wish I had a few different ones but it's my 1st LT-1...
Marc

[Warren F.]

Re: 1972 LT1 engine pads

I've been collecting engine pad stampings for sometime in my research on '71 LS6 Corvettes. However seeing some examples of the small block stampings for the LT-1 engines is interesting. The first feature I noticed is the two different numeral zero's used in the engine assembly stampings. It also appears that the numeral 6 or 9 looks identical, as if it can be used interchangeably.

[Dick W.]

Re: 1972 LT1 engine pads

I've been collecting engine pad stampings for sometime in my research on '71 LS6 Corvettes. However seeing some examples of the small block stampings for the LT-1 engines is interesting. The first feature I noticed is the two different numeral zero's used in the engine assembly stampings. It also appears that the numeral 6 or 9 looks identical, as if it can be used interchangeably.

Warren, you will see three distinct "0" in the stampings during the three year run of the engine