carburator help - NCRS Discussion Boards

carburator help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim T.
    Expired
    • March 1, 1993
    • 5351

    carburator help

    Installing a carburetor renew kit in my Holley 650 6210 spreadbore Qjet replacement I needed something to support the carburetor body to install two 12/24 HeliCoils because the threads in the body were stripped. Needing something I could support the inverted carburetor body to first drill out the screw holes and install the HeliCoils.
    I tried a large steel coffee can that was in my garage and it worked perfectly. The later steel coffee cans have a lip at the top of the can to attach a heavy foil seal you peal off to use the coffee. I will keep this one around instead of putting it in the metal recycle bin. Sure made the job easier.
    Last edited by Jim T.; January 23, 2010, 12:20 AM.
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"