Early 56 oil pan

[Roy B.]

This might interest some early 56 Corvette guy and NOS at that, many years ago I used a "truck" oil pan like this for a early 56 I had needing one , I had a metal shop remove and fill the inlet -plug area which made it look original and it's three step .Just thought some one may be interested

http://cgi.ebay.com/ebaymotors/NOS-1956-V8-Corvette-Oil-Pan-360867_W0QQcmdZViewItemQQhashZitem414bbea623QQitemZ280443659811QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[Edward M.]

Re: Early 56 oil pan

This might interest some early 56 Corvette guy and NOS at that, many years ago I used a "truck" oil pan like this for a early 56 I had needing one , I had a metal shop remove and fill the inlet -plug area which made it look original and it's three step .Just thought some one may be interested






http://cgi.ebay.com/ebaymotors/NOS-1...Q5fAccessories

Show us an "after" picture

[Roy B.]

Re: Early 56 oil pan

Show us an "after" picture

I would if I still had it , sold many years ago

[Joe L.]

Re: Early 56 oil pan

This might interest some early 56 Corvette guy and NOS at that, many years ago I used a "truck" oil pan like this for a early 56 I had needing one , I had a metal shop remove and fill the inlet -plug area which made it look original and it's three step .Just thought some one may be interested








http://cgi.ebay.com/ebaymotors/NOS-1...Q5fAccessories

Roy------


This pan is a GM #360867 SERVICE-only pan for E1956 Corvette applications as well some trucks. It was available until June, 1995.

[Roy B.]

Re: Early 56 oil pan

Yes but you dont see them vary often NOS for sale.

[John N.]

Re: Early 56 oil pan

How much is a used one worth?
Regards

[Roy B.]

Re: Early 56 oil pan

How much is a used one worth?
Regards

Original / I would say quite a lot , a one on only oil pan

[Jim D.]

Re: Early 56 oil pan

Close, but no cigar.