Torx bolts resource?

[Peter M.]

Can anyone recommend a resource for OEM Torx bolts? These bolts are used on L98 TPI setups

[Tom L.]

Re: Torx bolts resource?

I'm not sure if there are any special markings on them but a great source for all hardware is McMaster-Carr, http://www.mcmaster.com/ have fun!

[Peter M.]

Re: Torx bolts resource?

I'm not sure if there are any special markings on them but a great source for all hardware is McMaster-Carr, http://www.mcmaster.com/ have fun!

Thank you, Lynn

[Joe L.]

Re: Torx bolts resource?

Can anyone recommend a resource for OEM Torx bolts? These bolts are used on L98 TPI setups

Peter-----


Refresh my memory of what bolt application on the TPI system these are for. Are these the runner tube retaining bolts?

[William C.]

Re: Torx bolts resource?

They are used in a variety of locations, plenum to intake runners, runners to lower manifold, fuel line bracket t front of head, tiny ones on the fuel rails, lots of places...

[Jim D.]

Re: Torx bolts resource?

I should think if you went to some "junk" salvage yards you may find them on many GM products . Take a sample and a socket and ratchet . You may be surprised. Jim

[Joe L.]

Re: Torx bolts resource?

Can anyone recommend a resource for OEM Torx bolts? These bolts are used on L98 TPI setups

Peter-----


At least 2 of the bolts are still available from GM. These are as follows:

M8 X 1.25 X 34.5----GM #14081015

M8 X 1.25 X 30------GM #14081014