54 carb linkage

[Brad H.]

What parts at the carbs are cad plated or does anyone have a clean picture up close of what the correct look is at the carbs, linkages, rods etc? Also who carries the chatter springs that wrap around the rear brake drum , same year,also the adjust hole plugs at the drums, any diagrahms of where the metal ties under the dash go that wrap around wiring harness at various spots? Thanks Brad.

[Brad H.]

Re: 54 carb linkage

Anybody awake yet?

[Bruce B.]

Re: 54 carb linkage

Brad,
Try Carol at Grossmullers 1-800 258-5362.
She knows her stuff and is great to work with.

[Brad H.]

Re: 54 carb linkage

Come on boys ,someone has to have some pics of a fresh done carb and linkage done to judging standards for 54 cars, correct plating on all parts that is. Brad Also any certain p;acement of the brass wire ties (4) under dash?

[Steven N.]

Re: 54 carb linkage

Brad,
Just finished a set of '53. I can send you a picture after I get back from Boston, plus I have a set of '54's that was top flighted last November..........

[Brad H.]

Re: 54 carb linkage

Thanks Steve, would like to get the top end right even with the top flight. Brad.

[Chuck W.]

Re: 54 carb linkage

Does this help?

http://ckautollc.phanfare.com/2122242_2278895#imageID=29775588

[Brad H.]

Re: 54 carb linkage

Very nice MRRRR. CHUCK, Am I seeing all linkage stuff, from air cleaners, rod that connects it to the back linkage and all large rods to linkages at block, firewall as cad, or is some of it carb gold, top pieces with rod and flat sides connecting carbs seem to be black, is it painted, I see some of these are cad color on fresh done cars, who or what is correct? Once again, very nice on your cars, do you do it all or hire it out? Thanks, Brad 54/58