C3 Water Pump Fitting/Nipple - NCRS Discussion Boards

C3 Water Pump Fitting/Nipple

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pat K.
    Expired
    • November 1, 2003
    • 351

    C3 Water Pump Fitting/Nipple

    Can anybody tell me if this is the correct water pump fitting/nipple for my ’69 BB with AC?

    I checked the AIM, Bizzoco's book, and Dobbin's Fact book and I can't find a pic of the fitting.

    Pat
    Attached Files
    Last edited by Pat K.; July 7, 2009, 05:17 PM.
  • Henry J.
    Very Frequent User
    • November 1, 1999
    • 457

    #2
    Re: C3 Water Pump Fitting/Nipple

    Pat:

    This will not answer your question directly, but that fitting looks identical to the one on my car (1968 L36 w/o A/C).

    Comment

    • Pat K.
      Expired
      • November 1, 2003
      • 351

      #3
      Re: C3 Water Pump Fitting/Nipple

      Henry - the water pump I have on my car now is not the one it came off the line with. But it is the correct part number, and may have come from a non-AC car. '68 and '69 used the same part number for BB.

      Now I need to find out if BB AC cars used a different nipple.

      Thanks,

      Pat

      Comment

      • Patrick H.
        Beyond Control Poster
        • December 1, 1989
        • 11643

        #4
        Re: C3 Water Pump Fitting/Nipple

        Originally posted by Pat Kolis (40917)
        Now I need to find out if BB AC cars used a different nipple.

        Thanks,

        Pat
        If so, it should show it in the C60 section of the AIM.
        Vice-Chairman (West), Michigan Chapter NCRS
        71 "deer modified" coupe
        72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
        2008 coupe
        Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

        Comment

        • Jeff G.
          Expired
          • October 25, 2006
          • 187

          #5
          Re: C3 Water Pump Fitting/Nipple

          Pat,
          That's strange, I see 2 hex nuts in your picture. Mine has only one hex nut for the nipple and doesn't extend as far out as yours. See if this picture helps...
          Jeff
          Attached Files

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"