Oil filler cap - NCRS Discussion Boards

Oil filler cap

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rainer S.
    Very Frequent User
    • May 31, 2003
    • 468
    #1

    Oil filler cap

    Lost a point due to not having a hole in the oil filler cap gasket.
    What diameter is the hole in the gasket ?

    Rainer
    Tags: None
      • Top
    • Michael H.
      Expired
      • January 29, 2008
      • 7477
      #2
      Re: Oil filler cap

      Originally posted by Rainer Schwager (39931)
      Lost a point due to not having a hole in the oil filler cap gasket.
      What diameter is the hole in the gasket ?

      Rainer
      Rainer... an NOS 3723688 has an ID of 1.050-1.065". The OD is 1.690" and it's roughly .165-.170" thick.
      I suppose this one may have shrunk a bit over the decades though.

      It also has GM in a triangle ink stamped on one side. (obviously, the other side)
      Last edited by Michael H.; September 23, 2009, 05:10 PM.
        • Top

        Comment

        • Rainer S.
          Very Frequent User
          • May 31, 2003
          • 468
          #3
          Re: Oil filler cap

          Thanks, Michael...

          Rainer
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"