Screws for '57 Small Sill Step Plate - NCRS Discussion Boards

Screws for '57 Small Sill Step Plate

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Charles C.
    Expired
    • May 31, 1978
    • 65
    #1

    Screws for '57 Small Sill Step Plate

    I have seen one post on this but am still unsure of the screws used on the 56-60 small sill (at the door threshold) step plate. Are these countersunk, phillips head screws that have a head just a bit larger than the hole. The reason I ask is that the holes in my original sill step plates do not look like the rim has been indented at all which will be the case if countersunk screws are used. Thanks. Charles
    Tags: None
      • Top
    • Charles C.
      Expired
      • May 31, 1978
      • 65
      #2
      Screws for '57 Small Sill Step Plate

      I have seen one post on this but am still unsure of the screws used on the 56-60 small sill (at the door threshold) step plate. Are these countersunk, phillips head screws that have a head just a bit larger than the hole. The reason I ask is that the holes in my original sill step plates do not look like the rim has been indented at all which will be the case if countersunk screws are used. Thanks. Charles
        • Top

        Comment

        • Doug F.
          Very Frequent User
          • October 31, 1983
          • 322
          #3
          Re: Screws for '57 Small Sill Step Plate

          #8 pan head stainless is what i use, AUVECO # 13270, or send me a sase and i'll send you 8 of em, cary faber, 2232 n 21 ave, phx az 85009
            • Top

            Comment

            • Joel M.
              Very Frequent User
              • May 31, 1975
              • 141
              #4
              Re: Screws for '57 Small Sill Step Plate

              You might consider #8 shank #6 head chrome plated steel phillips pan head.
                • Top

                Comment

                • David S.
                  Very Frequent User
                  • November 30, 1982
                  • 310
                  #5
                  Re: Screws for '57 Sall Sill Step Plate

                  Hi charles.
                  I am going to try to post a few pictures from my 57 bowtie car that should answer you question.
                  Let me know if you need anything more.
                  Dave
                  Attached Files
                    • Top

                    Comment

                    Previous template Next
                    Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"