63 vett carburator jetting

**Clem Z.** · June 1, 2009, 08:48 PM

Re: 63 vett carburator jetting

Originally posted by Richard Sheridan (39583)

I am looking for the correct jet size for my 340 HP 63 vett. The carburator is a 3461S. Information on this carburator configuration is appreciated

pri .104 dia,sec .0689 dia. metering rod .060 X.069

**Richard S.** · June 2, 2009, 03:52 PM

Re: 63 vett carburator jetting

Many thanks Clem for the jet and rod dia..
Rich

**Timothy B.** · June 2, 2009, 04:09 PM

Re: 63 vett carburator jetting

Richard, The primary jets are available (.104) but the secondary size of .0689 may be more difficult to find.

**Clem Z.** · June 2, 2009, 04:28 PM

Re: 63 vett carburator jetting

using care you can solder up a larger one and redrill it.

Comment