66 L-79 Oil Pump Shaft Guide - Nylon or Steel? - NCRS Discussion Boards

66 L-79 Oil Pump Shaft Guide - Nylon or Steel?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob S.
    Very Frequent User
    • January 1, 2004
    • 182

    66 L-79 Oil Pump Shaft Guide - Nylon or Steel?

    Is there any value in using a steel guide or is it a waste of money for a standard volume/pressure pump?

    Thanks,
    Bob
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    Re: 66 L-79 Oil Pump Shaft Guide - Nylon or Steel?

    the nylon ones seem to deteriorate over time

    Comment

    • Mike M.
      NCRS Past President
      • May 31, 1974
      • 8383

      #3
      Re: 66 L-79 Oil Pump Shaft Guide - Nylon or Steel?

      Originally posted by Clem Zahrobsky (45134)
      the nylon ones seem to deteriorate over time
      agree with clem. go with steel. i've disassembled old sbc's with better than 100K miles and the nylon had fractures on its sides.mike

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"