1971 tower clamps for heater hoses

[Edward C.]

I have been looking for tower clamps for the hoses at the firewall and have only found a set from Strouds which I don't need all of them. Anyone know here they sell single corredt tower clamps? Also need origional type heater hoses. Seems I once saw these advertised in the Driveline but cannot locate it. Thanks Ed

[Robert S.]

Re: 1971 tower clamps for heater hoses

Best source for both is Dr. Rebuild.

[Edward C.]

Re: 1971 tower clamps for heater hoses

Robert thanks very much I forgot all about the Dr. Ed

[Michael B.]

Re: 1971 tower clamps for heater hoses

Ed, are you looking for dated clamps? I just replaced a bunch on my '69 L68 with dated clamps. The take offs are in good shape if you need one or a couple I'll bring them with me to Tahoe Thursday.

Mike

[Gary S.]

Re: 1971 tower clamps for heater hoses

Don't forget that the local salvage yard can be a source for original tower clamps. Even here in the rust belt of PA I have found quite a few cars that still have them installed. I have pulled a dozen or more and they are now stashed. Of course, they are dated properly.

[Edward C.]

Re: 1971 tower clamps for heater hoses

Michael I did not get your message until I got back from Tahoe. At this point I just need any date tower clamps for the heater 3/4 and 5/8 to the firewall. I will worry about date clamps later. If you have any what would you want and what condition. Sorry I missed you in Tahoe. Thanks Ed

[Edward C.]

Re: 1971 tower clamps for heater hoses

Gary thanks for the info. Do you know when the last tower clamps went to date wise? Ed

[Mark D.]

Re: 1971 tower clamps for heater hoses

Bill Hodel has them...dated and DCM.

[Edward C.]

Re: 1971 tower clamps for heater hoses

Help can't find Bill Hodel. Thanks Ed

[Mark D.]

Re: 1971 tower clamps for heater hoses

Bill Hodel
330-832-0871

[Edward C.]

Re: 1971 tower clamps for heater hoses

Thanks Mark I will contact Bill. Ed