1956-7 body mounting dims - NCRS Discussion Boards

1956-7 body mounting dims

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • E J.
    Expired
    • July 31, 2001
    • 2

    1956-7 body mounting dims

    I recently purchased a badly damaged 1956 Corvette body. I am looking for ALL of the frame mounting point dims. The manuals only have the plan form or view looking down dims. I need the side view, vertical dims and the radiator mounting dims.
    Where, how can I find or purchase these.
    I want to make a rigid body dolly to rebuild the body.

    PS: my driver is a original 1965 CALIF. coupe complete with ALL paperwork . Including the license plate with the mini- licenses that attach to the key chain.
    It won a white ribbon rolling of the tailor from Calif. I was the wrong color, which has been corrected, dirty, cracked 17 year old tires and damaged carpets from the womens high heel shoes.


    Thank You
    #36478
    Jim Johannes
  • Gary C.
    Administrator
    • October 1, 1982
    • 17661

    #2
    Re: 1956-7 body mounting dims

    Jim, check Noland Adams book there's a reference drawing in the 56-7 section and Noland references its source. Let me know if you need frame drawing. Gary....
    NCRS Texas Chapter
    https://www.ncrstexas.org/

    https://www.facebook.com/profile.php?id=61565408483631

    Comment

    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513

      #3
      Re: 1956-7 body mounting dims

      See page 2-2 in the "Frame" section in the ST-12; has both plan and side view dimensioned drawings.

      Comment

      • E J.
        Expired
        • July 31, 2001
        • 2

        #4
        Re: 1956-7 body mounting dims

        Thank you both for your response.+
        YES, the plan and side view pictures would be nice.
        Does it come from the same manual noted by John?
        as Page 2-2 in "FRAME" ST-12, noted in another message?
        I only have a 1956 Corvette Assembly Manual.

        Comment

        • John H.
          Beyond Control Poster
          • December 1, 1997
          • 16513

          #5
          Re: 1956-7 body mounting dims

          Jim -

          The "ST-12" (1953-62 Corvette Servicing Guide) is the only shop manual ever published by GM for the solid-axle cars, and is an essential companion to the Assembly Manual - it's available from the NCRS on-line store on this site.

          Comment

          • Gary C.
            Administrator
            • October 1, 1982
            • 17661

            #6
            Re: 1956-7 body mounting dims

            Jim, attached body dimensions from Noland Adams' C1 book and a '58 frame dimensional drawing. Frame dimensions are same as 56-7. Exceptions are bumper mounts added to late '57's and # of rear cross member holes. Hope this helps. Gary....
            Attached Files
            NCRS Texas Chapter
            https://www.ncrstexas.org/

            https://www.facebook.com/profile.php?id=61565408483631

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"