contact info needed for alum. reskinning

[Michael A.]

Hi,

Does anyone have the contact information for Mr. McNish or any of the other reputable members who offer reskinning services? Thanks Mike Anderson (317)729-2418

[Donald L.]

Re: contact info needed for alum. reskinning

http://www.z28camaro.com/

[Gary B.]

I highly recommend Don Dorfman

I don't know if this e-mail is still valid, but Don Dorfman does excellent work and I think he tends to be less expensive then some others.

Donald.dorfman@comcast.net

Don restored my L79 intake about 5 years ago and it came out looking like NOS.

Gary

[Jeff S.]

Re: contact info needed for alum. reskinning

I understand that Ken Hansen (Orindales in Medina, TN) is now set up to do this work. 731-783-0815.

[Ridge K.]

Re: contact info needed for alum. reskinning

I have had great results with Jerry MacNeish's work.

However, I've also had great work from fellow NCRS member Fred Hudson (advertises in The Driveline) phone (405) 942-2729

I haven't used John, but also have heard of excellent work by fellow member John DeGregory. I don't know if John does intake manifolds, but you might check. (also in The Driveline)

There's probably more good sources, but you can't go wrong with these three.

[Michael A.]

Re: contact info needed for alum. reskinning

Thanks to everyone for their quick responses. Hopefully this will help myself and a friend of mine with some reskinning we need done.
Later Mike

[Jim S.]

Re: contact info needed for alum. reskinning

Michael,

After restoring almost everything on my 66 I feel I can speak with some authority about Vendors and Restorers.

I have had pieces out for months and months , and have called some Guys 20 times! I have recieved some items back in perfect condition and others were sent out again! None were ever in the time stated beforehand .

I do not know the other people mentioned, nor have I ever used them, so they may be great! I just feel that a good guy ,doing a good job , and doing it when he says he will ,should be rewarded as it is so rare nowadays.

I do know that I used Jerry for my Intake and Valve covers. I called him on the phone prior to sending them and spoke with him at length (nice guy)who actually answers the phone !. Once he convinced me he was alright, I sent my parts. As is my habit ,I was going to call him in a few weeks to check on the progress and remind him that he had quoted a week or so.

It never happened! I recieved them back in the mail a week to the day he recieved them ! They looked perefect !

I did wind up calling him again, but it was just to say thanks and compliment him on his work and turn around time ! Unless something has happened in the last six months or so you can't go wrong with Jerry !

Jmtcw,

Jim Schwering