63 door panel questions - NCRS Discussion Boards

63 door panel questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Greg W.
    Expired
    • August 31, 2005
    • 117

    63 door panel questions

    Two questions
    1. I have taken the door panels off and on the driver side there are round foam disk over each of the cranks, vent and window. The passenger side does not have them. I assume they are to reduce noise. Are they suppose to be there and what are they called and where would I get them?

    2. One door has a black cover over the Regulator Support, I don't see it in the Assembly or Shop Manual. Need a name and maybe where to get one.

    Thanks, I guess that is more than one question.
  • Greg W.
    Expired
    • August 31, 2005
    • 117

    #2
    Re: 63 door panel questions

    Found the answer to 1. They are Foam Seals and appear that they should be there for both doors.

    Any help on 2.?

    Comment

    • Paul Y.
      Very Frequent User
      • September 30, 1982
      • 570

      #3
      Re: 63 door panel questions

      most vendors carry these parts at a very reasonable price. LIC,Ecklers,Paragon,Corvette America,Dr Rebuild. They might come in pairs.
      It's a good life!














      Comment

      • John H.
        Beyond Control Poster
        • November 30, 1997
        • 16513

        #4
        Re: 63 door panel questions

        Originally posted by Greg Walker (44442)
        2. One door has a black cover over the Regulator Support, I don't see it in the Assembly or Shop Manual.
        Greg -

        The front and rear access hole covers are shown in Section 1, sheet E15.00 in the '63 Assembly Manual; Long Island Corvette, Paragon, and others have them.

        Comment

        • Greg W.
          Expired
          • August 31, 2005
          • 117

          #5
          Re: 63 door panel questions

          Originally posted by John Hinckley (29964)
          Greg -

          The front and rear access hole covers are shown in Section 1, sheet E15.00 in the '63 Assembly Manual; Long Island Corvette, Paragon, and others have them.
          Thanks John, not sure how I overlooked the covers, I think I found the foam seals on the same page.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"