65 seat bolts (E) Headmark - NCRS Discussion Boards

65 seat bolts (E) Headmark

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rich P.
    Expired
    • January 12, 2009
    • 1361

    #16
    Re: 65 seat bolts (E) Headmark

    Originally posted by Alan Drake (43261)
    Rich,
    Screw 3847757 had a serrated flat washer while the later 3847758 was the same, but NO serrated flat washer. Bet GM had a slipping problem with the later bolt (758) so went back to (757) serrated. (But who knows?)

    Also see Section 11-13 Sheet B7.00 / Think LI has these

    Alan,

    Screw 3847757 must have had a running change somewhere in 64-65. I know that 68-up headlight actuator rod bolts use this part # and they have a non serrated washer. Also the 67-68-69-up front and rear seat mount bolts use this part # and they also are flat washers.

    So now the question is when did the change to the washer take place. I know from most of the bolts that had serrated washers the main useage was for 63 and 64.

    Rich

    Comment

    • Jim R.
      Very Frequent User
      • June 30, 2001
      • 643

      #17
      Re: 65 seat bolts (E) Headmark

      John i checked my seat bolts today the front ones are GL flat tip and the rears are B&h pointed tip.
      JR

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"