Need help choosing roller rocker arm

[Matthew M.]

Re: Need help choosing roller rocker arm

Joe

Another company to maybe look at would be Scorpian. They also warrant their product for life. I bought a set of these for the small block in my 69 Camaro they look like nice rockers. I have not yet had the car out with them installed. They were what my engine builder said were the best bang for the buck. I dont know if the BB rockers will clear a stock valve cover. Again BB I used Crower because they fit without any interferance. Yeah they were expensive but peace of mind is worth alot.

[Joe R.]

Re: Need help choosing roller rocker arm

Joe,

Back in post 14, you said:

"With Fel-Pro Cork-Lam valve cover gaskets (5/16" thick), you won't even need to flatten the drippers. I highly recommend the Cork-Lam gaskets. Fel-Pro #1630."

Does your recommendation still hold true with the stock type rockers? Or would you recommend something else?

Joe

[Joe L.]

Re: Need help choosing roller rocker arm

Joe,

Back in post 14, you said:

"With Fel-Pro Cork-Lam valve cover gaskets (5/16" thick), you won't even need to flatten the drippers. I highly recommend the Cork-Lam gaskets. Fel-Pro #1630."

Does your recommendation still hold true with the stock type rockers? Or would you recommend something else?

Joe

Joe----


Same recommendation regardless of rockers used.