Correct Heads - NCRS Discussion Boards

Correct Heads

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Walter R.
    Very Frequent User
    • January 6, 2009
    • 271

    Correct Heads

    I have a set of heads with casting number 3904391 and dated H16 on one and K216 on the other. The car is a 1966 427 with the engine being replaced in the early 70's. The block casting number is 3999289 dated K1473 which I assume was a 1973 block. From my restoration book the heads are for a 1967 427 but the date stamp identifies the heads as being built in 1966. Could these be the correct heads from the factory . When the engine was replaced by the previous owner I'm not sure if it was a short or long block replacement.
  • Joe R.
    Extremely Frequent Poster
    • May 31, 2006
    • 1822

    #2
    Re: Correct Heads

    Walter,

    The last '66 would have been produced in late July 1966. The 391 heads are for a '67. The H16 code would be July 1, 1966. The K216 code would indicate November 21, 1966. I'm not familiar with the block number, but if the K is a month code that probably indicates November as well. Is that a L-36 or L-72 car?

    Joe

    Comment

    • Joel F.
      Expired
      • April 30, 2004
      • 659

      #3
      Re: Correct Heads

      Walter,

      Joe is absolutely correct, but luckily for you the 391 heads are quite rare and valuable, so you may even come out ahead if you swap them out with the correct casting.

      Joel

      Comment

      • Walter R.
        Very Frequent User
        • January 6, 2009
        • 271

        #4
        Re: Correct Heads

        72 vehicle

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"