C2 Part Number Catalog

[Ron N.]

Can anyone tell me a good source / web site for C2 part numbers, descriptions and / or pictures? I am trying to validate head markings, type and finish for bolts, screws, washers and other fasteners.

[Joe R.]

Re: C2 Part Number Catalog

Ron,

For head markings and hardware info quite a bit can be gleaned from Corvette Central at:

http://www.corvettecentral.com/

You might also try Zip:

http://www.zip-products.com/Zip/assets/html/homepage.asp?URLCheck=1

and Paragon:

http://www.corvette-paragon.com/

Joe

[Joe R.]

Re: C2 Part Number Catalog

Ron,

I hear that "Corvette By The Numbers" by Alan Colvin has the part numbers you need. I have it on order, so I can't speak personally to it just yet. It's available on Amazon.com.

Joe

[John H.]

Re: C2 Part Number Catalog

Can anyone tell me a good source / web site for C2 part numbers, descriptions and / or pictures? I am trying to validate head markings, type and finish for bolts, screws, washers and other fasteners.

Do you have the:

Assembly Manual
'67 Judging Guide
Dobbins '63-'67 Book
Noland Adams '63-'67 book

[Steven S.]

Re: C2 Part Number Catalog

Do you have the:

Assembly Manual
'67 Judging Guide
Dobbins '63-'67 Book
Noland Adams '63-'67 book

The Dobbins book is the Vette Vues Fact Book, right?

Thanks,
Steve

[Joe L.]

Re: C2 Part Number Catalog

The Dobbins book is the Vette Vues Fact Book, right?

Thanks,
Steve

Steve-----



Yes.

[Steven S.]

Re: C2 Part Number Catalog

Thank you!

[Ron N.]

Re: C2 Part Number Catalog

Thanks to all who replied to my post. I have the Assembly Manual, '67 Judging Guide and Noland Adams '63-'67 book. What I have been unable to find is correct head marks and finish (cad, zink, phoaphate) etc on some bolts and screws. As an example during judging I got points off for rear valance screms that where not "black phosphate". I have the origionals, correct head markings, intrgal washer, cad. J/M states cad / judge says black phosphate? That's why I was looking for "official documentation".

[John M.]

Re: C2 Part Number Catalog

Ron,
I have original 67 rear valence screws that are definitely cad. Maybe both were used?
John McRae

[John H.]

Re: C2 Part Number Catalog

As an example during judging I got points off for rear valance screms that where not "black phosphate". I have the origionals, correct head markings, intrgal washer, cad. J/M states cad / judge says black phosphate? That's why I was looking for "official documentation".

Judging error - those screws are cad, not phosphated, assuming you're talking about the screws that attach the top of the valance panel to the body below the bumpers.

[Ron N.]

Re: C2 Part Number Catalog

Correct, those are the bolts I was talking about. I thought it was a judgiung error (only 1 point) but wanted to get other opinions. Thanks John and John for your information