1961 Fuel Injection Information Wanted

[Ray C.]

Could someone please provide information for the following Items?

1. Pictures of original firewall grommets : Part numbers 3746148 (right side for washer system) and 3689044 (left side non-fuel injection)

2. The differences between items mounted or not mounted on a fuel injected firewall and non-fuel injected fire wall.

I am gathering information for an article for the WNYNCRS Cross Flags News Letter and would like to confirm information prior to submitting for publishing.

Thanks for any help!

Ray

ray63@rochester.rr.com

[Ray C.]

Re: 1961 Fuel Injection Information Wanted

Looking for information on a 1961 non-fuel injected car. Could you please email or post pictures of the top right inner fender clips for the wire harness. Pictures of the firewall in the area of the wiper motor with out the motor installed. I would like to identify any holes, dimples or clips in this area.

Thanks for any information!

Ray

ray63@rochester.rr.com

[James G.]

Re: 1961 Fuel Injection Information Wanted

Ray,
NOLAND ADAMS book "CORVETTE RESTORATION AND TECHNICAL GUILD VOL # 1 covers in detail the differences between fuel injection and carburated cars.

Two big items are the air cleaner mounting bracket inside the driver fender, and the location of the windshield washer bottle, vacumn tank, and heat shield. Passanger side for fuel inject, driver side for carburator. Wire harness is very similar