Knock off wheel center cone dimensions...Repro, DBKO,and OE

[Jim V.]

Looking for height, and upper and lower diameter measurements on DBKO and KH KO wheel center cones.

Repro Knock off wheel cones seem to measure
1 15/16" Height
6 7/8" Lower OD
4" upper OD.

Curious what the dimensional differences are, if any, between; 1) repro KO, 2) repro DBKO's, and 3) KH KO cones.

Thanks
JimV

[Wayne M.]

Re: Knock off wheel center cone dimensions...Repro, DBKO,and OE

Looking for height, and upper and lower diameter measurements on DBKO and KH KO wheel center cones.

Repro Knock off wheel cones seem to measure
1 15/16" Height
6 7/8" Lower OD
4" upper OD.

Curious what the dimensional differences are, if any, between; 1) repro KO, 2) repro DBKO's, and 3) KH KO cones.

Thanks
JimV

Jim -- not sure what your acronym DBKO means, but I'll guess at direct bolt-on knock-offs (?).

Anyway, I've got a set of '66 originals with the cones still on the wheels, which makes it difficult to measure height and base diameter. My best efforts are: upper OD = 4.05" (caliper); height (depth caliper) 1.96" to 1.99"; lower OD = 6.92" (measured circumference with thin wire, then adjusted for error of wire size).

Also have a set of Western Wheel Corp -- K.H '64-65 repros, probably circa 1987: upper OD = 4.035; height = 2.03"; lower OD = 6.78" (using same measuring methods as above, as these cones are also on the wheels).

[Jim V.]

Re: Knock off wheel center cone dimensions...Repro, DBKO,and OE

Jim -- not sure what your acronym DBKO means, but I'll guess at direct bolt-on knock-offs (?).

Anyway, I've got a set of '66 originals with the cones still on the wheels, which makes it difficult to measure height and base diameter. My best efforts are: upper OD = 4.05" (caliper); height (depth caliper) 1.96" to 1.99"; lower OD = 6.92" (measured circumference with thin wire, then adjusted for error of wire size).

Also have a set of Western Wheel Corp -- K.H '64-65 repros, probably circa 1987: upper OD = 4.035; height = 2.03"; lower OD = 6.78" (using same measuring methods as above, as these cones are also on the wheels).

Wayne, yep...DBKO is direct bolt knock off.

Interesting that OE and Repro appear to be dimensionally equivalent.

Still looking for somebody with the DBKOs.....

Thanks Wayne!