67 Smog - NCRS Discussion Boards

67 Smog

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeremy H.
    Expired
    • January 1, 1999
    • 260

    67 Smog

    Working on a 67 435 A.I.R. car and need a few parts. Does anyone know where I can get the following:

    Pressed in tube or nipple that goes into the intake (pass side) just below where the PCV valve hose goes in. Also need the correct hose as well. It goes from the valve to the intake. I think the hose and nipple should be 1/2" or 3/4".

    Also I need the correct vacuum advance line clipe for a smog car. It has two places for tubes to clip from what I understand.

    Also, if anyone with a correctly done 435 A.I.R. car could send me some pics of the smog hoses, bypass hoses and vacuum advance line that would be very helpfull.

    Thanks

    Jeremy Hedges
  • Dick W.
    Former NCRS Director Region IV
    • June 30, 1985
    • 10483

    #2
    Re: 67 Smog

    Do a search for Bill Hodel. He is the smog man
    Dick Whittington

    Comment

    • Ridge K.
      Extremely Frequent Poster
      • May 31, 2006
      • 1018

      #3
      Re: 67 Smog

      Bill Hodel of Massillon, Ohio can be reached at (330) 832-0871, and is very helpful with advice.
      Good carburetion is fuelish hot air . . .

      Comment

      • Gary J.
        Extremely Frequent Poster
        • April 1, 1980
        • 1241

        #4
        Re: 67 Smog

        Pargon has the nipple and the hose. Look in some of Dr. Dobbins books I'm sure there are pictures in his books. Not at home at this time to look up the pages I'm on the NCRS Road Tour.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"