C1 chassis hardware finish question - NCRS Discussion Boards

C1 chassis hardware finish question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rod K.
    Very Frequent User
    • April 1, 1990
    • 443

    C1 chassis hardware finish question

    What finish was generally used on the bolts, etc., used on the chassis such as motor mounts, trans mounts, front crossmember and suspension, etc? Were these zinc plated or black phosphate or...?

    Thanks.
  • Benjamin C.
    Very Frequent User
    • July 31, 1994
    • 134

    #2
    Re: C1 chassis hardware finish question

    Rod, The judging manual will give you some help. With my 54 I used Nolan Adams book and looked at factory assembly line pictures. You can at least see if they are painted black. I cad plated all of the bolts on my 54 that were not painted black. Richard Fortier sells original bolts and can cad plate yours if you wish. Richard is very knowlegable and helpful, his ad is in the driveline mag.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"