66 PM Replacement Panels - NCRS Discussion Boards

66 PM Replacement Panels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Daniel R.
    Infrequent User
    • October 14, 2025
    • 1

    66 PM Replacement Panels

    Which company produces the most correct PM replacement panels? Are the jig assembled fronts worth the extra money? Working on a BB air car, I'm not building the car for judging. However, I do want to use correct appearing materials of good quality. Any thoughts or experiences with Dynamic Corvette Products? Any info is appreciated.
  • Mark F.
    Extremely Frequent Poster
    • July 31, 1998
    • 1591

    #2
    what is a PM panel ?

    OK Gary - thanks for the explanation below...I should have been able to figure that out
    thx,
    Mark

    Comment

    • Gary B.
      Extremely Frequent Poster
      • February 1, 1997
      • 7065

      #3
      Mark,

      PM = Press Molded

      Gary

      Comment

      • Stewart L.
        Very Frequent User
        • March 1, 1980
        • 356

        #4
        Check out Vette Masters in Virginia Beach

        Comment

        • Thomas N.
          Very Frequent User
          • July 31, 2002
          • 406

          #5
          Vette Masters 707 S. Military Highway, Viriginia Beach, VA is the only company doing truly press molded parts. The parts they are making they use a real press to form the parts, not an a and b side mold and c clamps to clamp them together. Their corners are consistent thickness with their real press process. Tom Payne is the owner/contact.

          NCRS New England Chapter Chairman 2022, 2024
          N E Regional Chairman 2024
          1967 Corvette Convertible Under Restoration
          1996 Corvette Coupe NCRS Chapter Top Flight 99.5, NCRS National Top Flight 100.0

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"