74 Seat Belt Receiver - Black - GM #344458 - NCRS Discussion Boards

74 Seat Belt Receiver - Black - GM #344458

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Victor S.
    Frequent User
    • August 24, 2017
    • 89

    74 Seat Belt Receiver - Black - GM #344458

    Hi All -

    Trying to pick up a couple of black seat belt wired buckle receivers for my 74 as the wiring inside my two receivers are shot. I'm trying to get the original seat belt warning system installed and working back into my car. I have the correct harness, relay, alarm and interlock - just need correct receivers.

    So.... is #344458 the correct number?? - I cannot find it in the AIM (as I think it was originally installed as a complete system (retractor, belt and receiver). I also cannot find this part number in my GM dealers parts book.

    Is that the correct receiver part number for a 74 coup, convertible or for both???

    Many thanks,
    Vic
  • Patrick H.
    Beyond Control Poster
    • December 1, 1989
    • 11648

    #2
    You can't replace the wiring in your current receivers?

    Just wondering, based on the appearance of the alleged NOS ones on ebay. I would think that you could slide out the buckle and webbing, and give it a try. However, I have no idea how the wiring is installed in the actual buckle.
    Vice-Chairman (West), Michigan Chapter NCRS
    71 "deer modified" coupe
    72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
    2008 coupe
    Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

    Comment

    • Mark E.
      Extremely Frequent Poster
      • April 1, 1993
      • 4581

      #3
      If no luck with eBay, reach out to David Sokolowski or Gulf Coast Corvettes. Each sells used parts.
      Mark Edmondson
      Dallas, Texas
      Texas Chapter

      1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
      1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

      Comment

      • Victor S.
        Frequent User
        • August 24, 2017
        • 89

        #4
        Thanks - will try and re-wire if I cannot find new ones. At this point just trying to verify if the part number listed in my original post is correct and the same for a convertible or coupe.

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43236

          #5
          Originally posted by Victor Scherer (63906)
          Hi All -

          Trying to pick up a couple of black seat belt wired buckle receivers for my 74 as the wiring inside my two receivers are shot. I'm trying to get the original seat belt warning system installed and working back into my car. I have the correct harness, relay, alarm and interlock - just need correct receivers.

          So.... is #344458 the correct number?? - I cannot find it in the AIM (as I think it was originally installed as a complete system (retractor, belt and receiver). I also cannot find this part number in my GM dealers parts book.

          Is that the correct receiver part number for a 74 coup, convertible or for both???

          Many thanks,
          Vic
          Vic------

          You are correct; in PRODUCTION the seat belts were supplied as an assembly of both buckle end, latch end, and shoulder harness.

          For 1974 and for the first time, the buckle and latch ends were available separately in SERVICE. I believe the buckle (receiver) end is the same for both coupe and convertible for 1974. GM number 344458 is the correct buckle end for black colored belts.

          GM number 344458 was discontinued without supercession in July, 1994.
          In Appreciation of John Hinckley

          Comment

          • Victor S.
            Frequent User
            • August 24, 2017
            • 89

            #6
            Thank you all for the help - very much appreciated.

            Vic

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"