Who makes keys from key codes - NCRS Discussion Boards

Who makes keys from key codes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Patrick B.
    Extremely Frequent Poster
    • August 31, 1985
    • 2000

    Who makes keys from key codes

    I have 67 key blanks and I know the GM codes for my keys. I doubt that Chevy dealers can still punch keys. Who in the restoration world provides that service?
  • Gary C.
    Administrator
    • October 1, 1982
    • 17726

    #2
    send Steve Walker a fellow NCRS member a PM or email
    NCRS Texas Chapter
    https://www.ncrstexas.org/

    https://www.facebook.com/profile.php?id=61565408483631

    Comment

    • Curt R.
      Frequent User
      • February 1, 2004
      • 37

      #3
      Copy that, He does great work!

      Comment

      • Mark E.
        Extremely Frequent Poster
        • April 1, 1993
        • 4578

        #4
        GARY BEAUPRE cut a key based on a blurry photograph. Look for my thread about losing the keys to my '70 where he saved my bacon. See https://garybeaupre.com
        Last edited by John W.; August 8, 2025, 09:55 AM. Reason: Mark requested change.
        Mark Edmondson
        Dallas, Texas
        Texas Chapter

        1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
        1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

        Comment

        • Brian M.
          Very Frequent User
          • November 1, 1994
          • 128

          #5
          Jeff Salz of the Michigan chapter can do it.
          I am very happy with the work he did for me.
          He has an ad in the Driveline
          Regards,
          Brian McIntyre

          Comment

          • Robert P.
            Very Frequent User
            • October 19, 2019
            • 311

            #6
            I will second Jeff's work A+
            Bob

            Comment

            • Mark E.
              Extremely Frequent Poster
              • April 1, 1993
              • 4578

              #7
              Originally posted by Mark Edmondson (22468)
              Steve cut a key based on a blurry photograph. Look for my thread about losing the keys to my '70 where he saved my bacon.
              Big mistake... GARY BEAUPRE saved my bacon and punched a new key from a photo.
              I highly recommend Gary... he goes above and beyond.

              Gary also has a nice collection of original key blanks and other hard to find Corvette bits.

              See https://garybeaupre.com

              I have also heard good things about Steve.

              My apologies for the confusion.
              Mark Edmondson
              Dallas, Texas
              Texas Chapter

              1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
              1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

              Comment

              • Mark F.
                Extremely Frequent Poster
                • July 31, 1998
                • 1548

                #8
                Originally posted by Mark Edmondson (22468)
                ...I highly recommend Gary... he goes above and beyond. Gary also has a nice collection of original key blanks and other hard to find Corvette bits...
                Could not agree more about Gary's Team and service...I now have beautiful NOS key blanks; coded to my Warranty Booklet; and expertly cut for my '67...even comes with a NOS wire key loop

                thx,
                Mark

                Comment

                • Terry M.
                  Beyond Control Poster
                  • September 30, 1980
                  • 15605

                  #9
                  I used Steve Walker for my 1969. I had the key codes, but over the years only the door locks and storage lock were correct. He made ignition lock and supplied the spare tire lock and keys for all, coded as the originals with the codes on the keys. Perfect for judging. Steve gave a lock and key presentation at the Missouri Regional which was very enlightening.
                  Terry

                  Comment

                  • Patrick B.
                    Extremely Frequent Poster
                    • August 31, 1985
                    • 2000

                    #10
                    Thanks fellows for your suggestions.

                    Comment

                    Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"