Deck-Lid Adjustable Rubber Stopper Height - NCRS Discussion Boards

Deck-Lid Adjustable Rubber Stopper Height

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Keith W.
    Very Frequent User
    • May 25, 2018
    • 201

    Deck-Lid Adjustable Rubber Stopper Height

    Any suggestions on how high or low to adjust the rubber stoppers on the bottom side of a convertible deck-lid? Does it vary on each car? Tks.

    IMG_8553.jpg
  • Robert R.
    Very Frequent User
    • May 31, 1975
    • 358

    #2
    Regarding your question, and please note that I’m doing this from memory as a formerly owned convertible, the bumper touches the folded convertible top frame to slightly compress it as the deck lid is closed. Observe this with your seat back pulled forward to see if they touch as the lid is closing. Then adjust it so as to not have the underside of the deck lid come in contact with the top frame.
    hope this helps.

    Comment

    • Keith W.
      Very Frequent User
      • May 25, 2018
      • 201

      #3
      Huge help and thanks Robert. The detail you state makes sense.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"