73 - Idle stop solenoid wire clips

[David C.]

1973 Coupe, L-48

I'm trying to source these small wire clips that support the idle stop solenoid wire. They live on the left valve cover attached to the brackets as shown. They should be black plastic, not painted as shown in the photo. I found nothing in the Assembly Manual. Note: This question was asked by someone in 2013 but no answer was given.



wire-clip-1973.jpg

[David C.]

Re: 73 - Idle stop solenoid wire clips

Additional info: This clip is also shown in the TIM&JG on page 110 (3rd edition) in the photo at the top of the page. It's hard to see in the photo, but it's the same clip as shown in my original post (not my car). It's a small linear black plastic clip.

[John S.]

DB062F28-8D65-4D23-B38F-EED3E7801E5F.jpg

[David C.]

Re: 73 - Idle stop solenoid wire clips

Thank you, John, for that information. I'll keep on the lookout. I think I can 3D print these things in my resin printer. I just need a good example of one to take measurements. I'll look for a flexible black resin. Once I get the result I want I can print them 20+ at a time on the printer.

-- Dave

[David C.]

Re: 73 - Idle stop solenoid wire clips

I guess the real secret is to know what the %$*& things are called. These might work, or serve as a basis for a more accurate 3D printed version:

https://www.ebay.com/itm/GM-Wiring-H...E/193778269953h

[John S.]

[David C.]

Re: 73 - Idle stop solenoid wire clips

Thanks John. I feel like we can solve this little plastic problem once and for all.

[John S.]

C43619C1-8D15-4CC7-AD57-21FF83B2443B.jpg

47D0CFDA-1A71-4D30-AA9E-7EB31A66519F.jpg

[David C.]

Re: 73 - Idle stop solenoid wire clips

Perfect! Thanks, John.