64 Conv. Rear Harness Routing - NCRS Discussion Boards

64 Conv. Rear Harness Routing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ron L.
    Very Frequent User
    • July 31, 1998
    • 111

    64 Conv. Rear Harness Routing

    See AIM Sect. 12 Sheet C4.00 - in the lower left hand corner of the illustration - as the harness reaches the firewall and turns upward there is a reference of COVER ASM. Does the harness go between the body and the kick panel, or does it enter the lower oval hole in the door post and come out of the upper oval hole and then to the connector from the instrument panel? Too many years since I took out the old harness. Thanks in advance for any help.
  • Don H.
    Moderator
    • June 16, 2009
    • 2231

    #2
    Re: 64 Cone. Rear Harness Routing

    Ron,,I don't have your answer, but I can offer the AIM page.. Someone should be able to help.


    Screenshot 2024-06-29 at 6.24.24 PM.jpg

    Comment

    • Ron L.
      Very Frequent User
      • July 31, 1998
      • 111

      #3
      Re: 64 Cone. Rear Harness Routing

      Thank you Don - yes, I have the complete manual - that is why I was able to cite the section.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"