'63 Upper A-arm Bumper? - NCRS Discussion Boards

'63 Upper A-arm Bumper?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jack H.
    Very Frequent User
    • November 1, 1998
    • 138

    '63 Upper A-arm Bumper?

    Searching for replacement bumpers for the '63(Nov '62build). Part # 3722380, Does anyone have the actual measurements for height and base diameter? Mine are approximately base 1 1/2", height 1 3/8" but are many moons old and in bad shape.
    Thanks...Jack
  • Gary B.
    Extremely Frequent Poster
    • February 1, 1997
    • 7018

    #2
    Re: '63 Upper A-arm Bumper?

    Jack,

    Where does the https://www.forums.ncrs.org/showthread.php?75077-C1-C2-amp-C3-Upper-Control-Arm-Bumper-Madness

    Gary

    Comment

    • Jack H.
      Very Frequent User
      • November 1, 1998
      • 138

      #3
      Re: '63 Upper A-arm Bumper?

      Gary, same post...picture call out

      Thanks Jack

      Comment

      • Gary B.
        Extremely Frequent Poster
        • February 1, 1997
        • 7018

        #4

        Comment

        • Jack H.
          Very Frequent User
          • November 1, 1998
          • 138

          #5
          Re: '63 Upper A-arm Bumper?

          Gary,

          That I will do but still would like to get the measurements before I buy a couple as the ones I've seen by the corvette vendors are bigger by a long shot.

          Thanks for help & insight...Jack

          Comment

          • Gary B.
            Extremely Frequent Poster
            • February 1, 1997
            • 7018

            #6
            Re: '63 Upper A-arm Bumper?

            Jack,

            Search the DB for 3742247. Maybe the info you want is there. I recall there was some controversy about diameter and height from the vendors.

            Gary

            Comment

            • Ray K.
              Very Frequent User
              • July 31, 1985
              • 370

              #7
              Re: '63 Upper A-arm Bumper?

              Jack,

              Several years ago when I had my '65 apart the upper bumper number seemed a bit confusing ( as listed in the GM P & A ) and my old Paragon catalog had a good illustration of the 2 numbers that might be applicable. They listed a #701K and #1342K so I ordered both of them. The #1342K turned out to be correct as they matched the original from the car which I believe is the GM #3742247. I still have the Paragon #701K new in the box and they measure approx 1 1/2" in height and 1 1/2" in at the base - thus it seems that they represent the GM #3722380. They are substantially smaller than the #3742247. Paragon also shows them for '53 - '62 Corvette upper bumper application.

              Ray

              Comment

              • Jack H.
                Very Frequent User
                • November 1, 1998
                • 138

                #8
                Re: '63 Upper A-arm Bumper?

                Gary/Ray,

                These bumpers will make one think for sure. It does seem the 3742247 is the way to go. Intersting although...I have 2 '74's and did a check on them for grins...one had bumpers that were 1 1/2" x 1 3/4(appox) and the other had one of the same size and one that was was 1 1/2" x 1 3/8" which matched what was on the '63. Will never know the events that produced these results over the years but my quest is on to find 3742247's.

                Thanks, Jack

                Comment

                Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"