'63 Inner Fender Front Bonding Strip

[Douglas C.]

Just looking for some verification if the '63 inner fender bonding strip I have is installed correctly or not. Its very difficult to tell from the AIM. Here's a pic from inside the right side inner wheel well, looking forward and up. Not sure if this is correct or if it be bonded to the other side of the skirts facing forward or flipped around or ???
A picture of the correct installation would be of big help.

Thanks for any responses.

--Doug

Front Bonding strip.jpg

[Douglas C.]

Re: '63 Inner Fender Front Bonding Strip

Just answered my own question here - the install in the picture is not correct. It needs to be switched with the other side and flipped so that the uppper extension faces forward, over the inner fender.

[Danny P.]

Re: '63 Inner Fender Front Bonding Strip

Just answered my own question here - the install in the picture is not correct. It needs to be switched with the other side and flipped so that the uppper extension faces forward, over the inner fender.

Hi Doug , these are photos of my original front inner fenders bonding Strips on my1963 fuelie.IMG_0021.jpgIMG_0740.jpgIMG_0742.jpgIMG_0028.jpg

[Douglas C.]

Re: '63 Inner Fender Front Bonding Strip

Danny,
Thanks for the photos. These are very helpful. I'm finding that the repro inner fender bonding strips, which vendors are now asking $100 each, leave a lot to be desired.