C2(66) Big Block Radiator Brass Plug Question - NCRS Discussion Boards

C2(66) Big Block Radiator Brass Plug Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Larry E.
    Extremely Frequent Poster
    • December 1, 1989
    • 1677

    #16
    Re: C2(66) Big Block Radiator Brass Plug Question

    Originally posted by Joe Lucia (12484)
    Larry-------


    I believe the taper for the NPT thread is exaggerated in the diagram. I don't think there would be that obvious a difference between NPT and NPTF in "real life", especially in the case of 1/8" . Also, NPTF is not straight thread; it is tapered.
    Joe: I am sure you are correct. Diagram was probably made to show there is a difference but not in correct scale. That being said I did
    compare my original plug (believe it to be NPTF) with the plugs I bought from Corvette Central(See Above) and saw that the
    C/C plugs where visually a little bigger. Thanks Again>Larry
    Larry

    LT1 in a 1LE -- One of 134

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"