58 rear leaf spring liners - NCRS Discussion Boards

58 rear leaf spring liners

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jason P.
    Very Frequent User
    • April 6, 2023
    • 207

    58 rear leaf spring liners

    I just got my leaf spring rebuild kit from corvette central and now see that the kit I purchased doesn't have the spring liners.

    When I disassembled my springs they didn't have any liners. Are they needed?

    I can't find anyone online that sells just the liners for C1 corvettes.

    Anyone know where we can get them if they are needed?
  • Mark S.
    Very Frequent User
    • July 31, 1983
    • 660

    #2
    Re: 58 rear leaf spring liners

    Liners are usually included in a rear spring rebuild kit, like Corvette Central 581001. This kit shows the liners included.

    Comment

    • Jerry C.
      Very Frequent User
      • November 1, 1995
      • 741

      #3
      Re: 58 rear leaf spring liners

      Quanta did sell liners only.

      Comment

      • Jason P.
        Very Frequent User
        • April 6, 2023
        • 207

        #4
        Re: 58 rear leaf spring liners

        I just called Quanta and they sell liners for 1963 and up. And I am guessing from what I have read that the C1 liners are different and more difficult, if not impossible, to find.

        Can anyone tell me if the liners in the image below are the correct ones for a 1958 Corvette?

        53-62-Leaf-Rear-Spring-Liners-Replacement-eBay.jpg

        Comment

        • Richard M.
          Super Moderator
          • August 31, 1988
          • 11323

          #5
          Re: 58 rear leaf spring liners

          Originally posted by Jason Pearce (70257)
          I just called Quanta and they sell liners for 1963 and up. And I am guessing from what I have read that the C1 liners are different and more difficult, if not impossible, to find.

          Can anyone tell me if the liners in the image below are the correct ones for a 1958 Corvette?

          [ATTACH=CONFIG]118063[/ATTACH]
          No not even close. Original liners are wax coated and have strips for the grooves. I showed them in the LINK in your previous post about band clamps.

          Comment

          • Joe M.
            Extremely Frequent Poster
            • April 30, 1990
            • 1338

            #6
            Re: 58 rear leaf spring liners

            I manufactured my own several years ago. Time consuming process, but glad I did so. If you wish to discuss, send Private Message with your phone number.
            Joe

            Comment

            • Richard M.
              Super Moderator
              • August 31, 1988
              • 11323

              #7
              Re: 58 rear leaf spring liners

              This is the Zip kit, Out of Stock. You may want to call them for estimated availability.

              SU-1070

              su-1070-1.jpg

              Comment

              • Richard M.
                Super Moderator
                • August 31, 1988
                • 11323

                #8
                Re: 58 rear leaf spring liners

                Top Flight Automotive says they have 2 in Stock.... HERE

                Comment

                • Richard M.
                  Super Moderator
                  • August 31, 1988
                  • 11323

                  #9
                  Re: 58 rear leaf spring liners

                  Originally posted by Richard Mozzetta (13499)
                  Top Flight Automotive says they have 2 in Stock.... HERE

                  Only 1 left this morning....

                  Comment

                  • Joe M.
                    Very Frequent User
                    • February 1, 2005
                    • 590

                    #10
                    Re: 58 rear leaf spring liners

                    Originally posted by Richard Mozzetta (13499)
                    No not even close. Original liners are wax coated and have strips for the grooves. I showed them in the LINK in your previous post about band clamps.
                    The pictured liners were sold by vendors many years ago for solid axle vettes. Are these applicable to any GM vehicle? Were they just a substitute in the absence of correct liners?

                    Comment

                    • Jason P.
                      Very Frequent User
                      • April 6, 2023
                      • 207

                      #11
                      Re: 58 rear leaf spring liners

                      Thanks. I purchase the kit from Top Flight and will return the kit I got from Corvette Central that didn't have the liners.

                      Comment

                      • Richard M.
                        Super Moderator
                        • August 31, 1988
                        • 11323

                        #12
                        Re: 58 rear leaf spring liners

                        Originally posted by Joe Mish (43421)
                        The pictured liners were sold by vendors many years ago for solid axle vettes. Are these applicable to any GM vehicle? Were they just a substitute in the absence of correct liners?
                        Joe I put those on a 59 Corvette years ago and they were not only ugly, they fell apart not long afterwards. The owner didn't want the best ones. He regretted it just like I told him he would.

                        Yes they may have been used for other cars too as a universal fits all liner.

                        Rich

                        Comment

                        • Richard M.
                          Super Moderator
                          • August 31, 1988
                          • 11323

                          #13
                          Re: 58 rear leaf spring liners

                          Originally posted by Jason Pearce (70257)
                          Thanks. I purchase the kit from Top Flight and will return the kit I got from Corvette Central that didn't have the liners.
                          Good then... Btw, when you have them apart you may want to paint the top surface of the upper springs silver.

                          Comment

                          Working...
                          Searching...Please wait.
                          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                          Please push the back button and reload the previous window.'
                          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                          Please push the back button and reload the previous window.'
                          An internal error has occurred and the module cannot be displayed.
                          There are no results that meet this criteria.
                          Search Result for "|||"