Question For Our Electrical Experts On C2 Cigarette Lighters

[Richard M.]

Re: Question For Our Electrical Experts On C2 Cigarette Lighters

Rich,
Thanks. One question though. On the fuse block, it appears there are two terminals for power windows. I believe only one is required. Am I misinterpreting this? Is the left one for auxiliary power and the right one for power windows? Can you clarify this?

Tom

Tom,

Here’s a photo I found that was posted by Edward Gruba. I don’t know if it’s a ‘63 or not. I assume the red wire going into the left hand terminal is the power window feed.

Gary

[ATTACH=CONFIG]119414[/ATTACH]

Both terminals are tied together behind the panel directly to Bat+, in the same unprotected circuit.(63-67)

One is used for PW, fused upstream, the other for U15 in 67 for Speed Minder Speedometer buzzer(unfused). See this thread re PW diagrams.

65,66 used the other one for optional Hazard flashers. 67 was integrated into the directional switch.

Rich