Steel Head Gaskets # 3863199 - NCRS Discussion Boards

Steel Head Gaskets # 3863199

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rocco S.
    Very Frequent User
    • December 21, 2013
    • 176

    Steel Head Gaskets # 3863199

    I recently acquired a lot of old GM engine gaskets, mostly Chevy part numbers. Most are partial sets in open GM packages.

    One set of interest is a pair of steel shim, big block head gaskets, marked with part # 3863199. Can anyone tell me the correct years and application? ie. 396, 427, 454, L-88?

    I also have a pair of big block cork valve cover gaskets, PAINTED SILVER. I have never seen these. They are in open GM packages, part of a full or head engine set I believe. Again can anyone help with year and application?

    I am interested in selling these but want to advertise correctly.<br><br>Thanking you in advance.
    ROCCO SCOTELLARO
    1967 Lynndale Blue/Black Coupe L79, M21, G81 (3.70:1), A31, A82, C60, K66, N11, U69
  • Owen L.
    Very Frequent User
    • September 30, 1991
    • 868

    #2
    Re: Steel Head Gaskets # 3863199

    From what I can see in the GM PartsWiki, the 3863199 head gaskets fit 65-68 396 Chevelle/Camaro and 70-74 454 engines from a number of GM lines (different part # but the note says stamped with 3863199). They are not listed in the Corvette parts catalogs as far as I can find.

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43221

      #3
      Re: Steel Head Gaskets # 3863199

      Originally posted by Rocco Scotellaro (59333)
      I recently acquired a lot of old GM engine gaskets, mostly Chevy part numbers. Most are partial sets in open GM packages.

      One set of interest is a pair of steel shim, big block head gaskets, marked with part # 3863199. Can anyone tell me the correct years and application? ie. 396, 427, 454, L-88?

      I also have a pair of big block cork valve cover gaskets, PAINTED SILVER. I have never seen these. They are in open GM packages, part of a full or head engine set I believe. Again can anyone help with year and application?

      I am interested in selling these but want to advertise correctly.<br><br>Thanking you in advance.

      Rocco------


      GM #3863199 were the original head gaskets used for 1965 Corvette L-78. The bore size is set for 396 cid engines and should probably work for any 396 engine for which the use of steel shim gaskets is desired.
      In Appreciation of John Hinckley

      Comment

      • Ray K.
        Very Frequent User
        • July 31, 1985
        • 371

        #4
        Re: Steel Head Gaskets # 3863199

        The GM #3863199 steel head gasket was used on all Special High Performance ( L-78 ) 396 engines as used in Corvette's, Chevelle's & Camaro's.
        Chevrolet P & A catalogs reference the bore size as 4.375" This gasket was also used on the 427 engines - L-36, L-68, L-71, L-72 with cast iron heads. Aluminum heads ( L-88, L-89 ) required a composition head gasket.

        The silver painted valve cover gaskets were the original GM #3860315.

        Ray

        Comment

        • Rocco S.
          Very Frequent User
          • December 21, 2013
          • 176

          #5
          Re: Steel Head Gaskets # 3863199

          Thank you to all that responded. The knowledge of this group is incredible.
          ROCCO SCOTELLARO
          1967 Lynndale Blue/Black Coupe L79, M21, G81 (3.70:1), A31, A82, C60, K66, N11, U69

          Comment

          • Joe L.
            Beyond Control Poster
            • February 1, 1988
            • 43221

            #6
            Re: Steel Head Gaskets # 3863199

            Originally posted by Rocco Scotellaro (59333)
            I recently acquired a lot of old GM engine gaskets, mostly Chevy part numbers. Most are partial sets in open GM packages.

            One set of interest is a pair of steel shim, big block head gaskets, marked with part # 3863199. Can anyone tell me the correct years and application? ie. 396, 427, 454, L-88?

            I also have a pair of big block cork valve cover gaskets, PAINTED SILVER. I have never seen these. They are in open GM packages, part of a full or head engine set I believe. Again can anyone help with year and application?

            I am interested in selling these but want to advertise correctly.<br><br>Thanking you in advance.
            In Appreciation of John Hinckley

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"