'65 gas lid back plate- dimple or no dimple in center of back plate? - NCRS Discussion Boards

'65 gas lid back plate- dimple or no dimple in center of back plate?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Garry B.
    Very Frequent User
    • January 1, 1991
    • 660
    #1

    '65 gas lid back plate- dimple or no dimple in center of back plate?

    I saw a '65 gas lid the other day and there was no dimple in the center of the back plate. In checking the JG I see that these were used in "early" '65. Does anyone know when the center dimple appeared. Don't know if the car needs a dimple or no dimple style. Thanks.
    Garry 18531
    Garry Barnes #18531
    '67 Lynndale Blue Coupe- National TF, BG
    ​'67 Sunfire Yellow Coupe- 4 Star Bowtie,


    Tags: None
      • Top
    • Mike D.
      Very Frequent User
      • July 31, 1996
      • 306
      #2
      Re: '65 gas lid back plate- dimple or no dimple in center of back plate?

      Was it an original gas lid or a reproduction gas lid? Dimples appeared through 1967 production. Do you have a picture?
      Mike Doty
      Intermountain Chapter Judging Chairman
      Region VIII Director
        • Top

        Comment

        • James W.
          Extremely Frequent Poster
          • December 1, 1990
          • 2655
          #3
          Re: '65 gas lid back plate- dimple or no dimple in center of back plate?

          Original '65 gas doors have the dimple, at least my late production '65 coupe's original gas door does. I know that my '64 does not, not sure if there was a transition change over between years 1964 and 1965 where some early '65's may have a gas door without the dimple. I can't remember reading anything in the latest '65 judging manual that states any deviations.

          James
          Attached Files
            • Top

            Comment

            • Garry B.
              Very Frequent User
              • January 1, 1991
              • 660
              #4
              Re: '65 gas lid back plate- dimple or no dimple in center of back plate?

              Thanks guys. There is a previous thread below that gave me what I needed to know. Essentially, a friend of mine will be having his car judged soon and his gas lid has not dimple on the back side. He doesn't know if the lid is original to his car so he was trying to figure out if he would take a hit for it. Considering his car was born in April and the article indicated that a late January car had a no dimple gas lid, he should be well within his six month allowance since there are no discernible data to indicate otherwise.
              Garry Barnes #18531
              '67 Lynndale Blue Coupe- National TF, BG
              ​'67 Sunfire Yellow Coupe- 4 Star Bowtie,


                • Top

                Comment

                • Joe R.
                  Extremely Frequent Poster
                  • March 1, 2002
                  • 1356
                  #5
                  Re: '65 gas lid back plate- dimple or no dimple in center of back plate?

                  I have a large collection of C2 gas lids, including the two original 1965 gas lids shown in the photo below.

                  I do not know the production dates for the cars these came from. All I can say is that both dimpled and non-dimpled lids appeared in 1965 production.
                  Attached Files
                    • Top

                    Comment

                    • Gary B.
                      Extremely Frequent Poster
                      • February 1, 1997
                      • 7022
                      #6
                      Re: '65 gas lid back plate- dimple or no dimple in center of back plate?

                        • Top

                        Comment

                        Previous template Next
                        Working...
                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"