C2 Accelerator Rod Lever Bushings - NCRS Discussion Boards

C2 Accelerator Rod Lever Bushings

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Joseph S.
    Very Frequent User
    • October 27, 2014
    • 187
    #16
    Re: C2 Accelerator Rod Lever Bushings

    Thanks Tony, great picture.
    Do you recall if the cogged inserts were also on the carburetor side of the accelerator rod? I would assume so.

    Joe
      • Top

      Comment

      • Joseph S.
        National Judging Chairman
        • February 28, 1985
        • 818
        #17
        Re: C2 Accelerator Rod Lever Bushings

        Tony, If that lever was never messed with we can get some more info from it. There is a big debate over the star washer under the ground straps. It looks like there is no star washer on that ground strap. I have never seen a star washer on any of the original cars I have witnessed. Nor have I seen any witness marks on the levers of other cars that weren't that original.
          • Top

          Comment

          • Tony S.
            NCRS Vice President, Director Region VII & 10
            • April 30, 1981
            • 965
            #18
            Re: C2 Accelerator Rod Lever Bushings

            Hi Joe. I don't have an answer for that, except that it is an FI car so no carb. The engine had been pulled out long before I bought the car. Sorry I couldn't provide more insight. Good luck with your quest. Tony
            Region VII Director (serving members in Arkansas, Kansas, Louisiana, Missouri, Oklahoma and Texas).
            Original member of the Kansas City Chapter, est'd 07/11/1982.
            Member: 1965 and 1966 National Judging Teams
            Judging Chairman--Kansas City Chapter.
            Co-Editor of the 1965 TIM and JG, 6th and 7th editions.
              • Top

              Comment

              • Harry S.
                Extremely Frequent Poster
                • July 31, 2002
                • 5245
                #19
                Re: C2 Accelerator Rod Lever Bushings

                https://www.forums.ncrs.org/showthread.php?125786-accelerator-rod-rubber-bushings&highlight=3794377


                Have a peek


                  • Top

                  Comment

                  • Tony S.
                    NCRS Vice President, Director Region VII & 10
                    • April 30, 1981
                    • 965
                    #20
                    Re: C2 Accelerator Rod Lever Bushings

                    Joe. I agree. Marco Hartner made that same point too. You both agree that no star washer was used with the ground strap attachment to the accelerator arm. Good catch! Tony
                    Region VII Director (serving members in Arkansas, Kansas, Louisiana, Missouri, Oklahoma and Texas).
                    Original member of the Kansas City Chapter, est'd 07/11/1982.
                    Member: 1965 and 1966 National Judging Teams
                    Judging Chairman--Kansas City Chapter.
                    Co-Editor of the 1965 TIM and JG, 6th and 7th editions.
                      • Top

                      Comment

                      • Gary B.
                        Extremely Frequent Poster
                        • January 31, 1997
                        • 6971
                        #21
                        Re: C2 Accelerator Rod Lever Bushings

                        Originally posted by Tony Stein (4600)
                        Joe. I agree. Marco Hartner made that same point too. You both agree that no star washer was used with the ground strap attachment to the accelerator arm. Good catch! Tony
                          • Top

                          Comment

                          • Richard M.
                            Super Moderator
                            • August 31, 1988
                            • 11288
                            #22
                            Re: C2 Accelerator Rod Lever Bushings

                            Originally posted by Harry Sadlock (38513)
                            https://www.forums.ncrs.org/showthre...hlight=3794377

                            Have a peek
                            Harry you may have missed it, but the car in that photo is a "No Radio" car.

                            Rich
                              • Top

                              Comment

                              • Harry S.
                                Extremely Frequent Poster
                                • July 31, 2002
                                • 5245
                                #23
                                Re: C2 Accelerator Rod Lever Bushings

                                Originally posted by Richard Mozzetta (13499)
                                Harry you may have missed it, but the car in that photo is a "No Radio" car.

                                Rich
                                Yes, it was the bushing and Joe's comments that I wanted folks to see.


                                  • Top

                                  Comment

                                  • Gary B.
                                    Extremely Frequent Poster
                                    • January 31, 1997
                                    • 6971
                                    #24
                                    Re: C2 Accelerator Rod Lever Bushings

                                    Originally posted by Tony Stein (4600)
                                    Joe. I agree. Marco Hartner made that same point too. You both agree that no star washer was used with the ground strap attachment to the accelerator arm. Good catch! Tony
                                      • Top

                                      Comment

                                      • Richard M.
                                        Super Moderator
                                        • August 31, 1988
                                        • 11288
                                        #25
                                        Re: C2 Accelerator Rod Lever Bushings

                                        Originally posted by Harry Sadlock (38513)
                                        Yes, it was the bushing and Joe's comments that I wanted folks to see.
                                        Oh I thought it was about the star washer. Sorry.

                                        Rich
                                          • Top

                                          Comment

                                          • Perry M.
                                            Very Frequent User
                                            • December 31, 1976
                                            • 325
                                            #26
                                            Re: C2 Accelerator Rod Lever Bushings

                                            Here is a picture of the bushing installed on my original June built, 1963 FI car. Also, there is no tooth washer of any kind on the ground strap.
                                            Attached Files
                                              • Top

                                              Comment

                                              • Tony S.
                                                NCRS Vice President, Director Region VII & 10
                                                • April 30, 1981
                                                • 965
                                                #27
                                                Re: C2 Accelerator Rod Lever Bushings

                                                Thanks Gary. There may be some with star washers, but none of my restoration projects had star washers.

                                                Tony
                                                Region VII Director (serving members in Arkansas, Kansas, Louisiana, Missouri, Oklahoma and Texas).
                                                Original member of the Kansas City Chapter, est'd 07/11/1982.
                                                Member: 1965 and 1966 National Judging Teams
                                                Judging Chairman--Kansas City Chapter.
                                                Co-Editor of the 1965 TIM and JG, 6th and 7th editions.
                                                  • Top

                                                  Comment

                                                  • Tony S.
                                                    NCRS Vice President, Director Region VII & 10
                                                    • April 30, 1981
                                                    • 965
                                                    #28
                                                    Re: C2 Accelerator Rod Lever Bushings

                                                    Great evidence/photo. Thanks for sharing! Tony
                                                    Region VII Director (serving members in Arkansas, Kansas, Louisiana, Missouri, Oklahoma and Texas).
                                                    Original member of the Kansas City Chapter, est'd 07/11/1982.
                                                    Member: 1965 and 1966 National Judging Teams
                                                    Judging Chairman--Kansas City Chapter.
                                                    Co-Editor of the 1965 TIM and JG, 6th and 7th editions.
                                                      • Top

                                                      Comment

                                                      • Gary B.
                                                        Extremely Frequent Poster
                                                        • January 31, 1997
                                                        • 6971
                                                        #29
                                                          • Top

                                                          Comment

                                                          • Tony S.
                                                            NCRS Vice President, Director Region VII & 10
                                                            • April 30, 1981
                                                            • 965
                                                            #30
                                                            Re: C2 Accelerator Rod Lever Bushings

                                                            Gary---great insight. We are redoing the 66 TIM JG for Bill now. I'll forward that comment to the 66 Mechanical team.

                                                            Best, Tony
                                                            Region VII Director (serving members in Arkansas, Kansas, Louisiana, Missouri, Oklahoma and Texas).
                                                            Original member of the Kansas City Chapter, est'd 07/11/1982.
                                                            Member: 1965 and 1966 National Judging Teams
                                                            Judging Chairman--Kansas City Chapter.
                                                            Co-Editor of the 1965 TIM and JG, 6th and 7th editions.
                                                              • Top

                                                              Comment

                                                              Previous 1 2 3 template Next
                                                              Working...
                                                              Searching...Please wait.
                                                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                                              Please push the back button and reload the previous window.'
                                                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                                              Please push the back button and reload the previous window.'
                                                              An internal error has occurred and the module cannot be displayed.
                                                              There are no results that meet this criteria.
                                                              Search Result for "|||"