1957 Wiper blades - NCRS Discussion Boards

1957 Wiper blades

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dan P.
    Very Frequent User
    • December 1, 1990
    • 683

    1957 Wiper blades

    did the release arm that had the release tang on it have patent numbers.TH JM show patent numbers.
  • Jay M.
    Frequent User
    • December 1, 1991
    • 39

    #2
    Re: 1957 Wiper blades

    1957 wiper blades did not have a release tag, rivet on top of receiver or patent numbers, with one exception a few examples of 57 wiper blades with a patent number ending in 905. These patent number was used only a couple of years and dropped in favor of patent number 826 and 626.
    What is the patent number shown in the judging manual?

    Comment

    • Dan P.
      Very Frequent User
      • December 1, 1990
      • 683

      #3
      Re: 1957 Wiper blades

      Judging Manuel shows 905

      Comment

      • Jay M.
        Frequent User
        • December 1, 1991
        • 39

        #4
        Re: 1957 Wiper blades

        There are two type of 905 patent number wiper blades. The early style would be for the 1957, the arm mount did not have a release tag or rivet on type of the mount. Then later style blade had the 905 patent but it was upgraded with the short release tag and rivet on top of mount.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"