'54 steering wheel - NCRS Discussion Boards

'54 steering wheel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brian W.
    Very Frequent User
    • September 30, 1990
    • 216

    '54 steering wheel

    I installed the steering wheel today. The problem started when I tried to install the horn ring. When the horn ring was fastened the horn blows continuously. There is a metal ring, a plastic ring and 3 screws with plastic insulators that hold the ring on. Am I missing something? Can anyone post a picture or a drawing showing the correct order for installing it. I think I did something wrong. Thanks.
  • Tony R.
    Very Frequent User
    • April 19, 2017
    • 201

    #2
    Re: '54 steering wheel

    Attached is a photo of a drawing that I got from someone on the NCRS or Corvette Forum site. I don't know who. But I saved it in case I needed it. Also attached is the photo I took after removing the steering wheel from my '54. I hope that this helps.

    Steering Wheel componants.jpg
    2018-02-10 20.33.07.jpg

    Comment

    • Brian W.
      Very Frequent User
      • September 30, 1990
      • 216

      #3
      Re: '54 steering wheel

      Tony:
      Thanks for the pictures, that's exactly what I need to fix the problem.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"