Headlight Motor Mounting Bolt C-2

[Jimmy G.]

Does anyone have a photo of the bolt / screw that mounts the headlight bracket to the motor. Sequence is motor / bracket / star washer / ground wire - bolt. Should be recessed hex head but beyond that I am uncertain. Not the end with the rubber mount. Thanks in advance as I need it for a judging school in Feb

[Gary J.]

Re: Headlight Motor Mounting Bolt C-2

The screw is a recess head. The original star washer is different than the hardware store variety.

[Robert P.]

Re: Headlight Motor Mounting Bolt C-2

That is how my 66 AIM has it, you aced it
Bob Peckham

[Alan D.]

Re: Headlight Motor Mounting Bolt C-2

Not a great photo hope it helps, (from Mar64 car)

[Joe R.]

Re: Headlight Motor Mounting Bolt C-2

All the originals that I have seen or remember were not zinc or cad plated. I have always bought mine from Long Island Corvette Supply (RIP) and both the star lock washer and bolt were cad plated. They were the correct length also. The indented bolt had a "C" in the center.

JR

[Richard M.]

Re: Headlight Motor Mounting Bolt C-2

A couple more. Sorry no closeup of the head or length spec. From a early 63.

[Jimmy G.]

Re: Headlight Motor Mounting Bolt C-2

Perfect Thanks guys

[Gary S.]

Re: Headlight Motor Mounting Bolt C-2

Untouched
HeadLightMotors4 copy.jpg

[Joe R.]

Re: Headlight Motor Mounting Bolt C-2

A couple more. Sorry no closeup of the head or length spec. From a early 63.

An early 63 with a white insulator is very rare. And no washer.

What was the date on that HL transmission Please.

JR

[Richard M.]

Re: Headlight Motor Mounting Bolt C-2

An early 63 with a white insulator is very rare. And no washer.

What was the date on that HL transmission Please.

JR

IIRC 11 or 12 of 62. Jerry Coia sent it to me to try to get it working. He kept the washer. The wire was just for testing.

USPS lost it sending back to him CT. It spent 3 days in Puerto Rico at the beach. Priority Mail? 6 days from FL to CT.

[Rich P.]

Re: Headlight Motor Mounting Bolt C-2

Headlight motor ground bolt. 5/16 recessed hex, 10-24 thread, cad plated with a P headmarking. Repros from LICS are very close. (Font is a little different)