66 roadster ventilator assembly to windshield frame spec - NCRS Discussion Boards

66 roadster ventilator assembly to windshield frame spec

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Robert P.
    Very Frequent User
    • October 19, 2019
    • 298
    #1

    66 roadster ventilator assembly to windshield frame spec

    Hi, trying to adjust my vent window assembly to the windshield frame and my AIM states .12+-.06 in the picture , so i need to shoot for an 1/8" inch between the windshield frame and ventilator assembly but can be as much as 3/16". Any info if this is right or wrong is welcome
    thanks Bob
    Tags: None
      • Top
    • Robert P.
      Very Frequent User
      • October 19, 2019
      • 298
      #2
      Re: 66 roadster ventilator assembly to windshield frame spec

      Problem solved Don Hooper was kind enough to measure the ones on his 65 roadster THANKS DON
      Bob
        • Top

        Comment

        Previous template Next
        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"