1963 Power Brake Hose valve adapter/elbow

[Richard M.]

Re: 1963 Power Brake Hose valve adapter/elbow

Richard had book out on something else so Sec J50 S3.00 the part is # 10,
3825961 TEE with note for added part 3825962 for C60 on 12-12-62

Thanks Alan. I just looked at my AIM copy and see them there too. The 3825961 is the LIC 22-13K and like what I have shown earlier in my stash of pieces. And the 3825962 is the # of the part I got for our 63 with aftermarket AC as shown in my first pics. I think I got it from John Meissenger back then. IIRC big bucks for that little guy. More info and some AIM scans below.

Richard,

I believe I need the elbow as indicated in the LICC Catalogue part #22-13K. Here's a picture. Do you have one like this?
Thanks,
Jerry

Jerry, That's not a 22-13k in your picture though. That looks like the FI part.

This is the LIC 22-13k. And that's what you need for the 340HP L76 with J50 Power Brakes. Here are some AIM scans that add what Alan posted. It's the 3825961 TEE in the AIM below. It's in the J50 RPO section. Also scans of the L76 and Base engine pages.

So as you have a L76 340 HP with J50 Power Brakes, you need what I have in my 2nd and 3rd photo I posted earlier. ....(the ones of the brass pieces, after the 2 engine pics). These 2 parts are the 3825961 TEE and the 444000 Adapter(and what makes up the LIC 22-13k).

I'll try to get them out to you tomorrow.

Rich

J50 Sheet 3 ( Note item #10 TEE part# 3825961. This is the LIC 22-13k )
J50_Sheet3.jpg


L75/L76 Sheet 3 ( Note item #4 Adapter part# 444000 )
L75_L76_Sheet3.jpg


Sec 6 (Base Engine) ( Note item #1 Elbow part# 444040 )
Sec6_SheetB1.jpg

=====

[Gerald C.]

Re: 1963 Power Brake Hose valve adapter/elbow

Thanks Rich!

[Richard M.]

Re: 1963 Power Brake Hose valve adapter/elbow

On it's way Jerry. You'll get a email with Trk# from USPS. It won't show anything until after I drop it off in a while.

Hopefully it won't go to Puerto Rico for 4 days for some warmer weather like your Headlight Motor did! **

Rich
** I shipped Jerry's motor back USPS PM in his Flat Rate box last Tuesday. It went to Orlando, then for some odd reason it went to Cantano PR, then to San Juan PR, then found it's way back to the mainland days later, then to MA, then to CT, then to Jerry's place. I guess it was too scared to go to the cold of the north at first then they found it on the beach in San Juan and made it go home. (sorry I couldn't help it)
Jerry and I were really worried about it. We had insurance on it but it's a rare early 63(11-62) piece of history. If it got lost that would've been bad. I recall a recent thread about a similar lost part here but they found it later, delivered to the wrong address IIRC.

2 Day promise...... 5 day trip

November 16, 2020, 2:34 pm
Delivered, Front Door/Porch
xxxxxx xxxxxxxxx, xx xxxxx
Your item was delivered at the front door or porch at 2:34 pm on November 16, 2020 in xxxxxxxxxxxxxxxx, CT xxxxxx

---

November 16, 2020, 7:10 am
Out for Delivery
xxxxxx xxxxxxxxx, xx xxxxx

November 16, 2020, 4:57 am
Arrived at Unit
xxxxxx xxxxxxxxx, xx xxxxx

November 16, 2020, 1:36 am
Arrived at USPS Regional Facility
HARTFORD CT DISTRIBUTION CENTER

---

November 16, 2020, 12:44 am
Departed USPS Regional Facility
SPRINGFIELD MA NETWORK DISTRIBUTION CENTER

---

November 15, 2020, 8:54 am
Arrived at USPS Regional Destination Facility
SPRINGFIELD MA NETWORK DISTRIBUTION CENTER

---

November 14, 2020
In Transit to Next Facility

---

November 12, 2020, 3:11 pm
Departed USPS Regional Facility
SAN JUAN PR DISTRIBUTION CENTER

---

November 12, 2020, 12:41 am
Arrived at USPS Regional Facility
SAN JUAN PR DISTRIBUTION CENTER

---

November 12, 2020, 12:19 am
Departed USPS Regional Facility
CATANO PR DISTRIBUTION CENTER

---

November 11, 2020, 10:38 pm
Arrived at USPS Regional Facility
CATANO PR DISTRIBUTION CENTER

---

November 11, 2020, 2:55 am
Arrived at USPS Regional Origin Facility
SEMINOLE-ORLANDO FL DISTRIBUTION CENTER

---

November 10, 2020, 3:12 pm
USPS in possession of item
SEBASTIAN, FL 32958

[Gerald C.]

Re: 1963 Power Brake Hose valve adapter/elbow

Thanks Rich. I'll let you know when it arrives!!

[John D.]

Re: 1963 Power Brake Hose valve adapter/elbow

Alan etal. Trivia on the FI power brake fitting. Look in the AIMs. Fitting was supposed to be4 installed at a 17 degree angle. Some say that fitting was zinc/cad plated?
That carb PCV set up sure is wild. I have one of those fittings around here buried. Never knew it's application. John