Original Knock-Off wheel fin width

[Gerald C.]

Can someone tell me what the fin width was at the edge on the originals?

Thanks

[Alan D.]

Re: Original Knock-Off wheel fin width

In the neighborhood of 0.22", they do vary a little.

[Wayne M.]

Re: Original Knock-Off wheel fin width

I'm getting around 0.147" near the rim, and it seems to get thicker as you go towards the hub -- I didn't realize this before. Hard to get a good measure with tires on the wheels. This is from a set of 5 originals I have, off a '66 Canadian-delivered tanker VIN 13162. This particular wheel is stamped B 13 66.