C2 ac - NCRS Discussion Boards

C2 ac

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mel S.
    Very Frequent User
    • August 31, 1992
    • 263

    C2 ac

    Thanks to all for the help on the vacuum hose for the water shut off on my 66 with factory air (see my post). Now i need help on the larger vacuum line roughly 3/8 OD with a 3/16 ID that comes out of the firewall grommet along with the smaller white striped line. i looked in the AIM but it doesn't seem be too clear. Where does it get it's vacuum from? i believe it goes to the STV for the AC. I also know that there is a "T" in this line. Any help would be appreciated. A picture would be awesome if possible.
    Thanks
    Mel
  • Keith B.
    Extremely Frequent Poster
    • September 15, 2014
    • 1581

    #2
    Re: C2 ac

    In that last post the picture I shared showed it getting the vacuum from the intake manifold port

    Comment

    • Mel S.
      Very Frequent User
      • August 31, 1992
      • 263

      #3
      Re: C2 ac

      Yes, thank you, but that was for the smaller vacuum line. This is for the larger one.
      Mel

      Comment

      • Robert W.
        Expired
        • June 28, 2018
        • 134

        #4
        Re: C2 ac

        Look in the 1966 AIM, C60 section, E5 and E6 (pp 288-289 on my digital copy). -Bob

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"